Omega Vehicle Security OMP-MODL - Manual (Page 261)

11.. . A PPENDIX A: M ASTER I CON R EFERENCE
U SING THE OMP-MODL 11-99
ICON CONFIGURATION DIALOG BOX:
CONFIGURATION OPTIONS:
Icon Name: Specify the label for the icon. This name will show directly under the icon
within the Program Net.
Input Name: In this box, HyperNet displays the Output Name of the icon connected to
this icon’s input. The Output Name can be changed in the other icon’s
dialog.
Output Totals After ___ Samples: When the number of samples specified have been
received and compared, the icon will output the count of how many
samples fell within the specified range.
Clear Sample Count and Totals upon Enable: The icon keps track of how many
samples it has compared, as well as how many fell into the specified range.
Check this box to force a reset of both counts upon receipt of an enable
signal.
Clear Totals After Output: Check this box to force the icon to clear the count after it is
output.
Units: Provides a text box for User entry of a units label that will be shown at the output
from this icon.
Count incremented when the input satisfies the following conditions: Specifies the
range that the input must fall within in order to increment the icon’s counter.