Oki 56801 User Manual
Page 45
39
3. Press the
YES
key to erase the message from the memory of
your fax machine.
Rejecting Unsolicited Fax Messages
The closed network option allows you to limit the locations with
which your fax machine can communicate. Using this function,
you can set your fax machine to refuse to receive any faxes from
locations whose telephone numbers are not programmed into
your One-Touch keys or Auto Dial numbers. This function
allows you to reject any unsolicited faxes such as advertising.
Note: In some countries, this function cannot be set by the user.
Please contact your dealer for assistance.
You can also set your fax machine not to send faxes to locations
whose telephone numbers are not programmed into your One-
Touch keys or Auto Dial numbers.
The available settings are:
• Limit Reception Only (RX)
• Limit both Transmission and Reception (T/R)
• No Limitation on Transmission or Reception (OFF).
Follow the instructions below to set the parameters desired.
1. Press the
Select Function
key.
2. Press the
9/User Prog.
One-Touch key. The display shows
1:FUNC. PROGRAMMING
.
3. Press the
YES
key. The display shows
FUNCTION NO. [ ]
.
4. Using the numeric keypad, enter 08. The display shows
08:CLOSED NETWORK
, and the current setting of this
function.
5. Press the
NO
key until the setting you want appears in the
display.
6. Press the
YES
key to confirm the new setting then press the
Select Function
key to finish.
Power Failures & Memory
Although the memory is backed up by battery (about 20 hours
when the battery has been fully charged and the temperatures are
normal), the following problems occur when power is cut off for
lengthy periods of time.
• Any messages your fax machine has scanned into memory,
but not yet transmitted, are lost.
• Any messages your fax machine has received into memory,
but not yet printed, are lost.
• If you have loaded documents onto the document feeder of
your fax machine, any dialing or transmission settings are
lost.
Your fax machine prints a power outage report to inform you of a
power failure. Use this report to determine which received
messages you may have lost and which transmissions you may
SELECT
FUNCTION
USER
PROG.
9/OP
08: CLOSED NETWORK
0
YES
TUV
8