Using voice request – Oki 56801 User Manual

Page 47

Advertising
background image

41

4. Adjust the paper guides on the manual paper feeder.

5. Insert a sheet of paper face up, adjusting the guides again to

ensure the paper is straight.

6. Press the

COPY

key.

Note: It is recommended to make single copies only when using

the manual paper feed slot. This will prevent any possible
paper feed jams from occurring.

Using Voice Request

The voice request feature allows you to have a conversation with
a person at a remote fax machine during a fax communication.
Either the sender or receiver can initiate a voice request.

If you are sending a fax, you can answer a voice request only
after all pages have been transmitted. If you are receiving a fax,
you can answer a voice request after reception of each page. You
will know if the person on the other fax machine has issued a
voice request when you hear a warbling tone. If you do not
respond in approximately six seconds, the voice request is
automatically cancelled.

Note: You need to have either an attached handset or an

external telephone to use the voice request function.

With the ITU-T V.34 modem, this feature can’t be used.

This function can only be used during Feeder-TX.

Initiating Voice Request

1. During a fax communication, press the

Hook/V. Request

key.

2. When the other party answers your request, your fax

machine will emit a repetitive warbling sound. The display
shows

LIFT HANDSET AND PRESS VOICE REQUEST

.

3. Lift your handset and press the

Hook/V. Request

key.

Note : If you press your

Hook/V. Request

key to initiate a voice

request during transmission, but no one is there to answer,

Advertising