Oki 56801 - Manual (Page 70)

64
Codes Used In Reports
Result Codes
The following codes indicate the results of communications.
Communication Codes
The following codes indicate the communication mode used for a
communication.
Code Description
BUSY The other machine’s line was busy or there was no
answer.
CANCL A message was erased after being held in memory for
10 days.
COMP. A multiple-location transmission was completed.
COVER The fax machine’s cover was opened during the
communication.
NO The transmission or reception failed due to a
communication error.
OK The communication was completed successfully.
PAPER The communication failed because the receiving
machine ran out of paper.
PUNIT Indicates a problem with the printing unit. Contact
your supplier.
R_JAM A paper jam occurred in your fax machine while it
was receiving a fax, and your fax machine was unable
to receive the entire message in memory.
S_JAM A document jam occurred in your fax machine.
STOP The Stop key was pressed, ending the communication
session.
Code Description
B.C. Multiple-location transmission (broadcast).
CONF=** Confidential reception (** is the box number)
TX A communication initiated by your fax machine.
RX A communication initiated by a remote fax machine.
POLL RX One-time standard polling reception.
POLL=** Bulletin polling transmission (** is the box number)
POLL TX Polling transmission.
FWD-T Forward transmission
FWD-R Forward reception