Shipping the fax machine – Oki 56801 User Manual
Page 79
73
5. Install a new toner cartridge. Follow Steps 4 to 9 in
“Replacing Toner Cartridge” on page 69.
6. With the copy stacker and document table closed, wait until
the time and answering mode appear on the display. Then
press the
Select Function
key.
7. Press the
7/Counter Display
One-Touch key. The display
shows
DRUM COUNT
.
8. Press the
YES
key to clear the image drum unit counter.
9. Press the
Select Function
key to finish.
CAUTION: Please abide by the disposal laws of your
country when disposing of replaced Image Drum Units.
Reading Print Counters
The print counters of your fax machine count the number of
pages your fax machine has printed or scanned in its lifetime. If
you are experiencing a problem, a service person may ask you to
check these counters.
Note: If the image drum unit has reached the end of its life, you
will also use this function to reset the drum counter. See
“Replacing Image Drum Unit” on page 71 for more
information.
1. Press the
Select Function
key.
2. Press the
7/Counter Display
One-Touch key. The display
shows DRUM COUNT.
3. Press the
NO
key again. The display shows the PRINT
COUNT.
4. Press the
NO
key again. The display shows the SCAN
COUNT.
5. Press the
Select Function
key to finish.
Shipping the Fax Machine
CAUTION: DO NOT ship the fax machine with the
image drum unit installed unless it is a new fax machine
and has never been used.
When shipping the fax machine, after it has been in use, please
follow the re-packaging procedure below:
1. Remove the image drum unit with toner cartridge from the
fax machine.
SELECT
FUNCTION
COUNTER
DISPLAY
7/KL
SELECT
FUNCTION
YES
SELECT
FUNCTION
COUNTER
DISPLAY
7/KL
NO
3X
SELECT
FUNCTION