Oki 56801 - Manual (Page 61)

55
12: DISTINCTIVE RING : Distinctive ringing is a service offered
by some telephone services that allow you to have different
numbers on one line, each with its own distinctive ring. In this
way, when you get an incoming call, you can identify what
number is being called by the ring pattern. Your local telephone
service can provide you with more information about this service
and if it is available. If available, this service is usually offered as
a monthly charge to your normal telephone bill. Available
settings are Off, Set and On. To use this function, refer to
“Setting Distinctive Ring” on page 57.
13: PAPER SIZE : This function allows you to tell your fax
machine what size of paper you are using in the paper cassette
and manual paper feed of your fax machine. Available settings
are A4, letter, legal 13 and legal 14.
14: USER LANGUAGE : This function allows you to select
among the languages programmed into your fax machine.
15: INCOMING RING : This function controls the telephone
ringing sound your fax machine makes when a call comes in.
When this function is set to off, your fax machine will not ring
during incoming calls. When set to on, your fax machine only
rings when set to manual receive mode or 11:RING RESPONSE
is set to 5 to 20 seconds (except 1 ring). When set to DRC, your
fax machine rings for each incoming call with the same tone,
even if you have function 12:DISTINCTIVE RING set to on.
Available settings are On, Off and DRC.
Note: DRC is only available if the setting of user function
12:DISTINCTIVE RING is available. Also, when set to
OFF, there is no effect on the ringer in telephone/fax auto
switch answering mode.
16: REMOTE RECEIVE : When you receive an incoming call,
this function allows you to remotely tell your fax machine to
switch from telephone to fax mode to receive an incoming fax.
To use this function, use the keypad of a handset or an external
telephone to enter the remote receive number you have
programmed into your fax machine. Available settings are Off,
00, 11, 22, 33, 44, 55, 66, 77, 88, 99, ** and ##. This function
only works if your telephone system is a touch-tone dialing
system.
17: MEM./FEEDER SW .: This function selects the transmission
mode of MEM. TX (scan before sending) or FEED. TX (send
each page directly from document feeder). This becomes
available when 25: INSTANT DIAL is off.
19: ECM FUNCTION : The error correction mode function helps
your fax machine to improve communication in areas where
telephone line conditions are poor. Available settings are On and
Off.
Note: When using ECM, the transmitting fax machine
automatically checks the data as it is sent. If the receiving
fax machine cannot verify the transmission, the
transmitting fax machine will retransmit as necessary.
Using ECM also increases transmission time because the
data is checked as it is transmitted.
Not all fax machines have ECM. If you have activated
ECM and then transmit to a fax machine not using ECM,