Teledyne 6600 - Manual (Page 9)

Part I: 1-1
Oil in Water Analyzer Part I: Control Section
Teledyne Analytical Instruments
Introduction
1.1 Overview
The Teledyne Analytical Instruments Model 6600 Control Section,
together with a 6600 Analysis Section, is versatile microprocessor-based
instrument.
Part I, of this manual covers the Model 6600 General Purpose, Bulk-
head Mount Control Section. (The Analysis Section is covered in Part II of
this manual, and Oil in Water application is covered in Part III) The Control
Section is for indoor/outdoor use in hazardous environment only. The
Analysis Section (or Remote Section) can be designed for a variety of
hazardous environments. All Sections are mounted in a NEMA-4 enclosure
(24”x20”x10”).
1.2 Typical Applications when Configured
with the appropriate Sample System
A few typical applications of the Model 6600 are:
• Offshore platforms, Produced Water, Sea Water
• Waste Water, Tank Farms, Fuel Depots, Refinery Effluents
• Oil Chemical Separators
• On-Board Ship
• Boiler Return Steam Condensate
• Process Cooling Water
• Bilge/Deballast Water Treatment
• Water Soluble Oils
• All Aromatic Hydrocarbons
• Many Organic Hydrocarbons (Contact Factory)