Trimble Outdoors SK8 - Manual (Page 100)

A-36 Lassen-SK8 Embedded GPS Module
Trimble Standard Interface Protocol
A.17.33 Report Packet 0x4D
This packet provides the current value of the receiver master oscillator offset in Hertz at
carrier. This packet contains one SINGLE number. The receiver sends this packet in
response to Packet
0x 2D. The permissible offset varies with the receiver unit.
A.17.34 Report Packet 0x4E
Indicates whether the receiver accepted the time given in a Set GPS time packet. the
receiver sends this packet in response to Packet
0x 2E. This packet contains one byte.
Table A-37. Report Packet 0x4E Data Formats
Value Meaning
ASCII “Y” The receiver accepts the time entered via Packet 2E. The receiver has
not yet received the time from a satellite.
ASCII “N” The receiver does not accept the time entered via Packet 2E. The
receiver has received the time from a satellite and uses that time. The
receiver disregards the time in Packet 0x 2E.