Trimble Outdoors SK8 - Manual (Page 160)

C-14 Lassen-SK8 Embedded GPS Module
Trimble ASCII Interface Protocol (TAIP)
C.12 ID Identification Number
Data String Format:
AAAA
Table C-12. Identification Number Data String Descriptions
This message is used to report or set the vehicle's (or sensor's) unique, four character,
alpha-numeric, user assigned ID. The default at cold start is 0000.
Example:
The following message will set the vehicle ID to 101.
>SID0101<
The following is simply a response to a query for vehicle ID.
>RID0101<
*
Note – The sensor will always check incoming messages for ID and compare with the
vehicle ID set in the sensor's memory. If no ID is included in the message, the sensor will
assume a match and accept the message. If the message sent to the sensor does contain
a vehicle ID but that ID does not match the ID previously set in the sensor, the message
will be ignored. This process is followed even when the ID_Flag is turned off (refer to the
message RM).
Item # of Char UNITS Format
Vehicle ID 4 n/a AAAA
Total 4