Trimble Outdoors SK8 User Manual
Page 146
B-6
Lassen-SK8 Embedded GPS Module
TSIP User's Guide
Serial Port Parameters
The default at start-up is 9600 baud, 8-odd-1. The serial port parameters on
the computer can be adjusted by typing '^I'. The program will prompt for
new serial port parameters.
TCHAT
TCHAT
is a simplified version of
TSIPCHAT
.
TCHAT.C
provides a good
basis for GPS software development.
The command line syntax is:
TCHAT
-c[port number] -f<optional file name>
where <optional file name> is the name where bytes received directly from
the receiver will be collected.
Full source code is provided. Unlike
TSIPCHAT
TCHAT
can be compiled
under both Microsoft and Borland Compilers. It uses the same source code
modules as
TSIPCHAT
. The following modules comprise
TCHAT
:
TCHAT.C
(main)
TSIP_RPT.C
TSIP_IFC.C
SERIAL.C
Software flow follows the same as
TSIPCHAT
, except that the display and
user interface has been greatly simplified. It is recommended that software
developer’s become familiar with
TCHAT
before studying the source code
to
TSIPCHAT
.