Trimble Outdoors SK8 - Manual (Page 125)

Lassen-SK8 Embedded GPS Module A-61
Trimble Standard Interface Protocol
A.17.62 Report Packet 0xBC
TSIP Packet BC is used to request the communication parameters on Port 1 and Port 2.
The table below lists the individual fields within Packet
0x BC.
Byte # Item Type Value Meaning
6 Flow Control BYTE 0-F OR of bits:
0 = none,
1 = RTS CTS
2 = transmit Xon Xoff
4 = transmit Xany
8 = receive Xon Xoff.
7 Input Protocols BYTE 0-1F OR of bits:
0 = none
1 = TAIP
2 = TSIP
8 = RTCM
8 Output Protocols BYTE 0-1F 0 = none
1 = TAIP
2 = TSIP
4 = NMEA
9 Reserved BYTE 0 None
Table A-71. Report Packet 0xBC Field Descriptions
Byte # Item Type Value Meaning
0 Port to Change BYTE 0
1 Port 1
Port 2
1 Input Baud Rate BYTE 0
1
2
3
4
5
6
7
8
9 None
110 baud
300 baud
600 baud
1200 baud
2400 baud
4800 baud
9600 baud
19200 baud
38400 baud
2 Output Baud Rate BYTE As above As above
3 # Data Bits BYTE 2
3
7 bits
8 bits
4 Parity BYTE 0
1
2 None
Odd
Even
Table A-70. Command Packet 0xBC Field Descriptions (Continued)