TRENDnet TVP-224HR - Manual (Page 104)

TVP-224HR User’s Guide
104
Site B TVP Gateway Configuration - FXS to FXO PLAR
Telnet / Console Web Configuration
Login to Site A TVP Gateway
From Console
1. Logon to the Web Configuration by opening
your browser
Enter Username “admin”
Enter Password “123”
2. Enter 192.168.0.55
3. You will be prompted for Username and
Password. Default Username and Password
are “admin” and “123” respectively.
or from
Windows command prompt
Enter “telnet 192.168.0.55”
Enter Username “admin”
Enter Password “123”
Web Configuration of Dial Plan
Dial Plan Settings / Dial Plan Table Setup
atpm req
4. Select “Add” and “Telephone
atpm aadd 11 5 5 11 2
5. Enter following fields
a. Telephone Number :11
b. Hunt Group ID: 11
c. Min. Digits: 5
d. Max. Digits: 5
e. Strip Length: 2
f. Append Prefix: none
6. Click on OK
Dial Plan Settings / Dial Plan Table Setup
7. Select “Add” and “HuntGroup”
8. Enter following fields
a. Hunt Group ID: 11
b. Destination ID: 11
9. Click on OK
Dial Plan Settings / Dial Plan Table Setup
10. Select “Add” and “DestinationID”
11. Enter the following fields
a. Destination ID: 11
b. Hostname (or IP address)
192.168.0.20
c. Click on OK
Dial Plan Settings / Dial in PLAR/CID
12. Enter 11201 in the PLAR Address Field
13. Click on OK
Dial Plan Settings / Store Dial Plan
14. Click on Yes
atpm hadd 11 2 11
atpm dadd 11 h323
192.168.0.20
atpm done
atpm store
set tcid 0 dial_in plar 11201
config activate
config store
Lines 4-13 creates a zone
number (a number that tells
GW B to forward to a remote
destination) for TVP GW A.
Lines 12-14 setup the hotline
(PLAR) from TVP Gateway
B to TVP Gateway A