TRENDnet TVP-224HR - Manual (Page 120)

TVP-224HR User’s Guide
120
Appendix E - Factory Default Settings
The following table lists the settings of certain parameters before the TVP-224HR
is shipped.
Parameter Default Setting
Network
PPPoe disabled
DYN DNS disabled
DHCP Server enabled
Configured IP address 192.168.0.1
Configured IP subnet mask 255.255.255.0
Default gateway IP address 0.0.0.0
Current active IP address 192.168.0.1
Current active subnet mask 255.255.255.0
IP precedence 0 0 0 0
Ethernet MAC address 00-50-2d-xx-xx-xx
Ethernet link speed 10/100 auto-negotiation
User ID for HTTP browser and Telnet client login admin
Password for HTTP browser and Telnet access
login 123
HTTP server
enabled
Telnet server enabled
Serial port (Fixed)
Baud rate 19,200
Number of data bit 8
Parity check None
Number of stop bit 1
Flow control None
H.323
h323 display_name customer
h323 h245_term_type 60
h323 rtp_port_base 30,000
h323 out_fast_start Off