TRENDnet TVP-224HR - Manual (Page 74)

TVP-224HR User’s Guide
74
From this window, we can Add / Delete / Find or List desired telephone
numbers and map them to a hunt group.
Parameter Description
Telephone
Number Telephone number to match. This is only part of
the total dialed string.
Hunt Group ID
For each hunt group ID, you need to assign it a
unique identifier between 0 and 99.
Min. Digits
Minimum number of digits to be collected before
the ATPM starts matching the dialed string with
entries in the address table.
Max. Digits
Maximum number of digits to be collected before
the ATPM starts matching the dialed string with
entries in the address table.
Strip Length
The number of digits to be stripped at the
beginning of the collected dial string before
forwarding the string to the destination.
Append Prefix
(Optional) Digit(s) to be added to the beginning of
the collected dialed string before forwarding it to
the destination.
Hunt Group Table
1. From Navigation Bar, Select Dial Plan Settings / Dial Plan Table Setup.
2. The default values are Add and Telephone. Change Telephone to Hunt Group
and Click on Select
3. A screen will appear showing the following page: