Chapter 9 - configuring voip from a web browser, 1 http setting mode, Chapter 9 – TRENDnet TVP-224HR User Manual
Page 65: Configuring voip from a web browser, Http setting mode
TVP-224HR User’s Guide
65
Chapter 9
Configuring VoIP from a Web
Browser
9
This chapter explains procedures for configuring the TVP-224HR from a web browser.
9.1 HTTP setting mode
This section describes the processes for setting up the VoIP Gateway once it has been
installed. Java enabled browsers including Microsoft Explorer version 4 or higher, or
Navigator version 4.5 or higher can be used in this section to view and change
parameters.
In the Address box, enter the following:
1.
(This is the default IP in the gateway from factory)
2. Press enter to confirm and you should find the screen below.
3. The User name is admin (all lower case) . P assword is 123. Both admin and 123
are default strings from factory. For security reasons, please change and memorize
the new password after this first setup.
4 . Click “OK”. The main screen will appear as b e l o w .