TRENDnet TVP-224HR - Manual (Page 81)

TVP-224HR User’s Guide
10
Chapter 10
Making Calls with TVP-224HR
This chapters shows how to make phone calls from telephony devices connected
to the TVP-224HR directly through or indirectly.
10.1 Configuration Examples
Default Dial Plan
Before any configuration set up, your TVP-224HR should have the following
basic default information.
Network
IP : 192.168.0.1
Mask: : 255.255.255.0
Gateway : 0.0.0.0
Dial Plan
81
No. Hunt Group Dest. ID Dest.
201 1 1 0 (local port #1)
202 2 2 1 (local port #2)
203 3 3 2
204 4 4 3
1. If your TVP’s two FXS ports are connected to two
telephones, say port 2 and port 3 respectively, just
pick up phone 203 and dial ‘204’, phone 204
should ring.
201 202
204 203
2. 204 TVP local port #3 )))