TRENDnet TVP-224HR - Manual (Page 106)

TVP-224HR User’s Guide
106
Site A TVP Gateway Configuration - FXO to FXO PLAR
Telnet / Console Web Configuration
Login to Site A TVP Gateway
From Console
1. Logon to the Web Configuration by
opening your browser
Enter Username “admin”
Enter Password “123”
Enter 192.168.0.20
2. You will be prompted for Username and
Password. Default Username and
Password are “admin” and “123”
respectively.
or from
Windows command prompt
Enter “telnet 192.168.0.20”
Enter Username “admin”
Enter Password “123”
Web Configuration of Dial Plan atpm req
Dial Plan Settings / Dial Plan Table Setup
atpm aadd 22 5 5 22 2
3. Select “Add” and “Telephone
4. Enter following fields
a. Telephone Number: 22
b. Hunt Group ID: 22
c. Min. Digits: 5
d. Max. Digits: 5
e. Strip Length: 2
f. Append Prefix: none
5. Click on OK
Dial Plan Settings / Dial Plan Table Setup
6. Select “Add” and “HuntGroup”
7. Enter following fields
a. Hunt Group ID: 22
b. Destination ID 0: 22
8. Click on OK
Dial Plan Settings / Dial Plan Table Setup
9. Select “Add” and “DestinationID”
10. Enter the following fields
a. Destination ID: 22
b. Hostname (or IP address)
192.168.0.55
c. Click on OK
Dial Plan Settings / Dial in PLAR/CID
11. Enter 22201 in the PLAR Address Field
12. Click on OK
Dial Plan Settings / Store Dial Plan
13. Click on Yes
atpm hadd 22 2 22
atpm dadd 20 h323 192.168.0.55
atpm done
atpm store
set tcid 0 dial_in plar 22201
config activate
config store
Liness 3-12 create an
address entry for TVP
Gateway B
Lines 11-13 setup the hotline
(PLAR) from TVP Gateway A
to TVP Gateway B