TRENDnet TVP-224HR - Manual (Page 52)

TVP-224HR User’s Guide
Data – Administration Password Setup
Admin Login
Old Password
Enter the old password
New password
Enter the new password here. If no password is required, leave this
blank. If a password is set, the password will be required in order to
change the configuration.
Retype New
password
Enter the new password here again. This entry must match the
value above.
Buttons
OK
Click on OK to confirm new password
L
Note
Changes to the password from the Web UI and Telnet are
effective immediately unless trying to use the new password set in
Web UI and Telent from Console port. In this case, you would
have to reboot the GW before the password would take effect.
Figure 26: Password Dialog
Enter the default "User Name" and the "Password" you set on the Administration Password
Setup screen above.
Remote Administration
Remote Administration allows you to connect to this interface via the Internet, using your Web
browser or Telnet. By default, both services are activated.
52