TRENDnet TVP-224HR - Manual (Page 87)

TVP-224HR User’s Guide
87
1. Continue entering the Gateway A Dial Plan as laid out in the tables below
(Telephone Table, Hunt Group Table and Destination Table) following the
above procedures.
2. After you have entered the Dial Plan, make sure you Store Dial Plan to flash
memory. From the Navigation Bar on the left side, Click on Store Dial Plan
3. The following screen will appear on the right side. Click on YES
Gateway B: Dial Plan Setup
1. Enter Gateway B Dial Plan into Gateway B as shown in the tables below
(Telephone Table, Hunt Group Table and Destination Table) following the above
procedures.
2. After entering all the information listed in the tables below, DO NOT navigate
away from Dial Plan Settings. Click Store Dial Plan, and click YES to save your
dial plan to Flash Memory.
Gateway A and Gateway B Dial Plan Tables
Gateway A - Telephone Number Table
Phone
#
Hunt
Group ID
Min.
Digits
Max.
Digits
Prefix
strip
Prefix
Address
Function Comment
203 2 3 3 3 None
Dialing “203” calls
phone on FXS Port
2
204 3 3 3 3 None Dialing “204” calls
phone on FXS Port