TRENDnet TVP-224HR - Manual (Page 78)

TVP-224HR User’s Guide
78
DRAM – Everytime you make an entry into the Address Table, Hunt Group
Table or Destination ID table, you have to Click on Complete. This only
saves the plan to the working memory / DRAM. If there was a power outage
or the TVP-224HR was unplugged or a system crash for what ever reason, the
Dial Plan in working memory / DRAM will be lost.
9.7 Restore Dial Plan
Restore Dial Plan - Will retrieve the Dial Plan from Flash Memory / Non-
Volatile Storage but erase the dial plan currently in DRAM / Working
memory.
Note: To ensure your new settings are actually accepted, please check the
configuration page carefully after you submit the new settings. If the new settings
are not present, it probably conflicts with the old settings. or there is not enough
space to store your settings.
9.8 Line Settings
Channel Status
View all settings made to each Channel (port). Simply Select the Channel (0-
3) and Click on View
Codec Selection
Select the codec of your preference.
• G.711 PCM 64kbps (A-law and μ-law)
• G.723.1A ACELP/M-MLQ (5.3, 6.3kbps)
• G.729AB CS-ACELP (8kbps)
Common Parameters
Common Parameters is found under Common Settings and allots the amount
of time given to each step of the dial process.