TRENDnet TVP-224HR - Manual (Page 76)

TVP-224HR User’s Guide
76
Each telephony port of the TVP-224HR must be assigned a unique destination
ID. Fill out the worksheet for local destinations by designating each port a
unique destination ID,
9.4 Dial in PLAR / CID
Data – Dial in PLAR / CID Screen
DDNS Service
PLAR Address
Enter PLAR Address which could be any destination telephone
number already entered into the dial plan. This programs the
gateway to automatically connect you to that number. This port will
not be able to dial any other numbers when PLAR is used.
CID – Number
and Name
This is a separate feature to PLAR. If you would like to have the
Caller’s Identification including Number and Name forwarded to the
recipient, please provide the information in the provided fields.
Buttons
OK
On/Off
Private-line automatic ringdown (PLAR) circuits have statically configured
endpoints and do not require the user dialing to connect calls. The PLAR
feature provides an easy method to create a switched Voice over IP (VoIP)
call without digit dialing. PLAR connections are often referred to as a "bat-
phone" or “hotline” type of application. This is when a phone goes off-hook