Address book, Detailed settings, Address book detailed settings – Xerox 604P18057 User Manual
Page 118
5 Scan/E-mail
118
Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128133 User Guide
1.
Select [Transfer Protocol] on the
[Scan to FTP/SMB] screen.
2.
Select the required option.
3.
Select [Save].
FTP
Specifies the FTP protocol.
SMB
Specifies the SMB protocol.
SMB (UNC Format)
Specifies the SMB protocol (using the UNC format).
NOTE: If Remote Authentication has been enabled, a popup message will prompt the
user to enter a login and password before using the Scan to FTP/SMB feature. The
login and password will be passed to the Kerberos server. Only when the user is
authenticated (eg. User xyz really is user xyz) will the feature be made available.
Address Book
Use this feature to select a destination server from the Address Book. Selecting a
server causes the preset information to be entered into the entry fields: Server, Shared
Name, Save in, Login Name, and Password. For information on how to register
destinations, refer to Address Book in the Setups chapter on page 250.
1.
Select [Address Book] on the
[Save in:] screen.
2.
Perform the necessary
operations.
3.
Select [Save].
Show Details
Displays detailed settings of the selected server.
Detailed Settings
Use this feature to assign a file name to a document to be scanned.
1.
Select [Detailed Settings] on the
[Save in:] screen.
2.
Perform the necessary
operations.
3.
Select [Close].