Xerox 604P18057 - Manual (Page 337)

Fault Codes
Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128/133 User Guide 337
047-213 An error occurred in the finisher. Contact the Xerox Welcome Center.
047-214 An error occurred in the Duplex Module. Contact the Xerox Welcome Center.
047-215 An error occurred in the paper output assembly. Contact the Xerox Welcome
Center.
047-216 An error occurred in the finisher. Contact the Xerox Welcome Center.
047-218 An error occurred in the Tandem Tray Module. Contact the Xerox Welcome
Center.
062-211
063-210 An error occurred in the document feeder. Contact the Xerox Welcome Center.
062-277 A communication error occurred between scanning and feeding components of
the machine. Contact the Xerox Welcome Center.
062-790 The scanned document is copy-prohibited. Refer to Illegal Copies in the Before
Using the Machine chapter on page 28 and verify the types of documents that
can be copied.
065-210
065-211
065-212
065-213
065-214 An error occurred in the machine. Contact the Xerox Welcome Center.
071-210
071-211 Tray 1 malfunctioned. Contact the Xerox Welcome Center. Use a different paper
tray.
072-210
072-211 Tray 2 malfunctioned. Contact the Xerox Welcome Center. Use a different paper
tray.
073-210
073-211 Tray 3 malfunctioned. Contact the Xerox Welcome Center. Use a different paper
tray.
074-210
074-211 Tray 4 malfunctioned. Contact the Xerox Welcome Center. Use a different paper
tray.
116-701 Double-sided printing is not possible due to insufficient memory. Add memory.
116-702 Printing was performed using a substitute font. Check the print data.
116-703 An error occurred during PostScript processing. Either confirm the print data, or
open spool settings on the details tab in the print driver to disable bi-directional
communication.
116-713 The job was printed out in parts because the hard disk ran out of space. Delete
unnecessary data.
116-720 An error occurred during printing due to insufficient memory. Close unused ports
or delete unnecessary data.
116-740 A numerical value operation error occurred because the print data contains a
value that exceeds the limit of the printer. Check the print data.
Code Description and Remedy