Xerox 604P18057 User Manual
Page 336
16 Problem Solving
336
Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128/133 User Guide
034-728
034-784
034-785
034-796
035-701
Transmission cannot be made because the telephone number is not correct.
Check the telephone number of the remote machine and send the document
again. Customers who use G3 DP (Dial Pause) should check that the dialed
number does not contain “*” or “#”.
034-790
034-791
034-792
034-793
034-794
034-795
Is the telephone line correctly connected to the machine? Check that the phone
line is connected correctly and send the document again. These codes are
displayed only in certain countries.
035-702
036-507
The other party cancelled the transmission. Ask the other party to check their
machine status and resend the document if necessary.
035-704
035-744
035-745
The specified feature (such as F Code) is not supported by the remote machine.
Contact the other party, and resend the document without using the feature if
required.
035-705
035-708
035-709
035-710
035-712
The remote machine may have encountered a problem. Contact the other party
and resend the document if necessary.
035-720
The remote machine cannot receive your document. Ask the other party to
check that their machine:
• Has paper in the tray
• Has no paper jam
• Has enough memory
• Supports G3 reception.
When specifying features such as relay broadcasting or a remote mailbox, ask
the other party if their machine supports these features, and if the password is
correct.
035-746
The fax network does not respond. Check the following and send the document
again.
• Is the telephone line correctly connected to the machine?
• The other party may not be connected to the fax network, or there may be
some problem with the network.
When you are connected to a fax network that requires an access code, enter
two pauses after the access code, and then dial the telephone number.
035-749
The other party's telephone number was redialed the set number of times but
the remote machine did not answer. Ask the other party to check the telephone
line and connection to the machine.
041-210
041-211
An error occurred in the paper tray or Tandem Tray Module. Contact the Xerox
Welcome Center.
047-211
047-212
An error occurred in the paper output assembly. Contact the Xerox Welcome
Center.
Code
Description and Remedy