Xerox 604P18057 User Manual
Page 330
16 Problem Solving
330
Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128/133 User Guide
003-981
Stapling mixed size documents is available only for documents with the same
width. Cancel the staple feature or reset the documents with the same width.
005-275
005-280
005-283
005-284
005-285
005-286
An error occurred in the document feeder. Contact the Xerox Welcome Center.
012-211
012-212
012-221
012-223
012-224
012-260
012-263
012-282
012-283
012-284
012-285
012-291
012-293
012-294
012-295
012-296
An error occurred in the finisher. Contact the Xerox Welcome Center.
016-210
016-211
016-212
016-213
016-214
016-215
An error occurred on the software option settings. Contact the Xerox Welcome
Center.
016-450
The SMB host name has been set twice. Change the host name.
016-454
Could not acquire the IP address from DNS. Check the DNS settings and IP
address acquisition method setting.
016-503
Could not determine the name of the SMTP server when e-mail was
transmitted. Check if the SMTP server is set correctly. Also, check that the DNS
server is set correctly.
016-504
Could not determine the name of the POP3 server when e-mail was transmitted.
Check if the POP3 server is set correctly. Also, check that the DNS server is set
correctly.
016-505
Could not log in to the POP3 server when transmitting e-mail. Check if the user
name and password used for the POP3 server are set correctly.
Code
Description and Remedy