Other settings, Print mode settings – Xerox 604P18057 User Manual
Page 220
11 Setups
220
Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128/133 User Guide
Remote Server Port Number
Allows you to enter the port number for the KDC server communication within the range
of 1–65535.
Remote Server Realm Name
Allows you to enter the KDC realm name within a maximum of 64 characters.
Other Settings
This feature allows you to select the e-mail receiving protocol from either SMTP or
POP3.
1.
Select [Other Settings] on the
[Network Settings] screen.
2.
Perform the necessary
operations.
3.
Select [Close].
E-mail Receive Protocol
Allows you to select the protocol for receiving e-mail.
Print Mode Settings
This screen allows you to change the default settings for the printer configuration. For
more information, refer to the following.
NOTE: Key Operator access is required for this feature.
Allocate Memory – page 221
Other Settings – page 223
1.
Select [Print Mode Settings] on
the [System Settings] screen.
2.
Select the required option.
3.
Select [Close].