Xerox 604P18057 - Manual (Page 348)

18 Glossary
348 Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128/133 User Guide
Border limit One more sheet is used when the length of the transmitted
document exceeds the length of paper installed on the
receiving terminal. A margin at the bottom of a received
document can be eliminated so that the data can be printed on
one page. The amount of space that can be removed from the
bottom of a document is the border limit. When the border limit
value is small, the data is printed on the next page. But when it
is large, a larger space can be cut so that data can be printed
on one page.
BPS An abbreviation of Bits Per Second. This is a measure of how
fast a modem can transmit or receive data.
Chain Dialing A single dialing command that ties together keypad dialing
and dial directory locations for a single dialing operation.
Collated Output programming where each copy set is delivered in the
same order the documents were placed in the Document
Feeder. Example: Two copies of a three-page document,
would output as page1/copy1, page2/copy1, page3/copy1,
page1/copy2, page2/copy2, page3/copy2.
Communication Mode Selects the communication mode used for transmission to a
remote fax machine from G3 or F4800.
Communication(s) Communications network which can offer audio data
(telephone), image data (fax), picture data (videotext) and PC
data (PC communication service) over the same channel. In
this guide, referred to as transmitting and receiving images as
well as speaking with a remote user.
Contrast The intensity of the display of an image, or the degree of
difference between the gray tones on a document page. See
also Halftone and Photo.
Copy Sets Groups of copies of a multi-page set of documents. If you
have a four-page document and you want to make 10 copies
of a document, you will be making 10 copy sets.
Covers Card or paper used to add to the front or back of a copy set.
Default Screen A screen displayed immediately after switching on the power
or pressing the Clear All button. The screen is also displayed
when the Auto Clear feature is used.
Default Setting (s) The settings used by the machine when the user does not
specify settings.
Default Value (s) Values set on a preset screen.
Delayed Start Programming that enables the machine to process a
document at a later time.
Dial To use a telephone number for document transmission. The
methods of dialing provided by the machine include: manual
dialing using the numeric keypad, speed dialing, and using the
Address Book, etc.