Reduce/enlarge, Output format – Xerox 604P18057 User Manual
Page 128
5 Scan/E-mail
128
Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128133 User Guide
Reduce/Enlarge
This feature allows you to select the enlargement/reduction ratio of the document for
scanning.
1.
Select [Reduce/Enlarge] on the
[Scan Options] screen.
2.
Perform the necessary
operations.
3.
Select [Save].
Preset %
• 100% – Sets the enlargement/reduction ratio to 100% (original size).
• Presets – Allows you to select the preset enlarge/reduce settings. Select one of
these to specify the enlargement/reduction ratio. The presets are set up by the Key
Operator.
Variable %
Allows you to specify an enlargement/reduction ratio within the range of 25 to 400%.
Auto %
Automatically selects the enlargement/reduction ratio, depending on the size of
documents and the Output Size set. When you select this option, [Output Size] is
displayed at the right side of the screen.
Output Format
This section describes how to configure the settings for outputting scanned data. For
more information on these screens, refer to the following.
Image Compression – page 129
Read Receipts (MDN) – page 129
Split Send – page 129
Document Name – page 130
NOTE: For Network Scanning, the following buttons are also displayed.
Login Name – page 130
Password – page 131
Meta Data – page 131