Power on self test 3-7, Introduction to 3-7, Power on 3-7 – Zebra Technologies 160S User Manual
Page 43
Indicator Light
Name
Status
Indication
POWER
ON
Printer is ON.
PRINTHEAD
OFF
Normal operation.
ON
Head Over Temperature condition. Printing stops until the printhead
cools down. Printing resumes automatically.
Printhead Under Temperature condition. Printing continues.
Power Supply Over Temperature condition. Printing stops until the
power supply cools down. Printing resumes automatically.
Flashing
Printhead Open.
PAPER/
RIBBON
OFF
Media and ribbon (if used) are properly loaded.
ON
Paper out.
Flashing
1. In Thermal Transfer Mode: Ribbon is out.
2. In Direct Thermal Mode: Ribbon is in the printer.
PAUSE
OFF
Normal operation.
ON
Printer has stopped all printing operations.
DATA
OFF
Normal operation, no data being received.
ON
Labels are printing.
Single flash The CANCEL key was pressed and a format was successfully deleted
from the print queue.
Flashing
Receiving data from host computer.
Slow
flashing
Printer sent a stop transmitting command to the host computer.
DARKEN
ON
Printer is in the Configuration Mode. See
for more information.
POSITION
ON
CALIBRATE
ON
3-6
Zebra S-Series User’s Guide
42