Zebra Technologies 160S - Manual (Page 82)

Options
Peel-Off
Your printer may be equipped with the Peel-Off option. In the Peel-Off
Mode, only the label backing rewinds onto the Rewind Spindle. The
Peel/Tear Bar separates the label from the backing and the Label Avail-
able Sensor activates the PAUSE mode to allow the operator to remove
a printed label before subsequent labels print.
This option cannot be added to a printer equipped with the optional Cutter.
Cutter Module
Your printer may be factory equipped with a Cutter Module that cuts la-
bels after they have been printed. In addition, an optional Cutter Catch
Tray can be added to gather the labels once they have been cut.
Media Rewind
Your printer may be equipped with a Media Rewind Option. This option
supports both the Rewind and Peel-Off modes of operation.
In Rewind mode, both labels and backing material rewind internally
onto a user-supplied three-inch core. A Rewind Bracket guides the media
back to the Rewind Spindle after printing.
This option cannot be added to a printer equipped with the optional
Cutter.
(See
Peel-Off Option for Peel-Off mode of operation.)
Zebra S-Series User’s Guide 9-1
81