Zebra Technologies 160S User Manual
Page 80
Advertising
SYMPTOM
DIAGNOSIS
ACTION
For printers with the Cutter
Option installed: Printing
stops. PAPER/RIBBON,
PAUSE, and CANCEL LEDs
on.
Media jammed in Cutter.
Remove media, clean Cutter Module.
Connecting cable not con-
nected to Cutter Module.
Plug cable into Cutter Module.
Cutter Module is dirty.
Clean Cutter Module.
End of the media is not posi-
tioned correctly on top of the
platen.
Re-position media so that the end is on
top of the platen.
Zebra S-Series User’s Guide
8-5
79
Advertising
This manual is related to the following products: