Loading the ribbon 17, Operator controls, Power switch front panel – Zebra Technologies R-140 User Manual
Page 27
Advertising
Operator Controls
POWER Switch
The POWER switch is located at the back of the printer above the power
cord and fuse. Turn on the printer.
Front Panel
The step-by-step instructions in this
section tell you which keys to press
and what appears on the liquid crystal
display (LCD) during the calibration
procedure.
For a more detailed explanation of the
front panel keys and lights (as shown
in Figure 9), refer to the instructions
that begin on
.
18 Zebra R-140 User’s Guide
Figure 9
Advertising