Cancel key self test 88, Cancel key 88 – Zebra Technologies R-140 User Manual

Page 98

Advertising
background image

PAUSE Key Self Test

This self test can be used to provide the test labels required when making

adjustments to the printer’s mechanical assemblies. See the sample printout

in Figure 32.

1. Turn off the printer.
2. Press and hold the PAUSE key while turning on the power.

n

The initial self test prints 15 labels at 2.4"/61 mm per second

per second, then automatically pauses the printer. Each time the PAUSE

key is pressed, an additional 15 labels print.

n

While the printer is paused, pressing the CANCEL key alters the self

test. Now each time the PAUSE key is pressed the printer prints 15

labels at 6"/152 mm per second.

n

While the printer is paused, pressing the CANCEL key again alters the

self test again. Each time the PAUSE key is pressed the printer prints 50

labels at 2.4”/61 mm per second.

n

While the printer is paused, pressing the CANCEL key again alters the

self test a third time. Now each time the PAUSE key is pressed the

printer prints 50 labels at 6”/152 mm per second.

n

While the printer is paused, pressing the CANCEL key again alters the

self test a fourth time. Each time the PAUSE key is pressed the printer

prints 15 labels at the printer’s maximum speed.

n

To exit this self test at any time, press and hold the CANCEL key.

Zebra R-140 User’s Guide

89

Figure 32

Advertising