Yamaha CLP-811 User Manual
Page 55
52
<Table 4>
Effect MIDI Map (REVERB)
MSB LSB 00H
01H
02H
03H~
00H
No effect
←
←
←
01H
HALL 1
HALL 2 HALL 1
←
02H
ROOM
←
←
←
03H
STAGE
←
←
←
<Table 5>
Effect MIDI Map (VARIATION)
MSB LSB 00H
01H
02H
03H~
00H~06H No effect
←
←
←
07H
ECHO
←
←
←
41H
CHORUS
←
←
←
44H
SYMPHONIC
←
←
←
46H
TREMOLO
←
←
←
9. System Exclusive Messages
(Clavinova MIDI compliance)
[F0H]
→
[43H]
→
[73H]
→
[xxH]
→
[nnH]
→
[F7H]
F0H:
Exclusive status
43H:
Yamaha
73H:
Clavinova
xxH:
Device ID (CLP’96:3BH; CLP common:01H)
nnH:
Substatus
Control
nn
Internal clock
02H
External clock
03H
Bulk data:
06H (followed by bulk data)
F7H:
End Of Exclusive
* Substatuses 02H and 03H can be received by
Device ID 01H as well as by 3BH.
1) Bulk Dump Format for Key-by-Key
Tuning Data
F0H,43H,73H
3BH:
Device ID (CLP’96:3BH)
06H:
Bulk ID
00H:
Bulk No.
(Bulk dump format for key-
specific tuning data)
00H,00H,0BH,00H:
Data length
[Bulk data]:
low(A-1), high (A-1) ...
low (C7), high (C7)
[Checksum (1 byte)] = 0 - sum(bulk data)
F7H:
End Of Exclusive
2) Bulk Dump Format for Sequence
Data
F0H,43H,73H
nnH:
Device ID (CLP-811:40H; CLP-611:3EH)
06H:
Bulk ID
05H:
Bulk No.
(Sequence-data bulk dump format)
0xH,0xH,0xH,0xH:
Data length = xxxx bytes
[Bulk data]:
low,high,...,low,high
[Checksum (1 byte)] = 0 - sum(bulk data)
F7H:
End Of Exclusive
3) Bulk Data Format for Organ
Combination
F0H,43H,73H
3BH:
Device ID
06H:
Bulk ID
06H:
Bulk data format for
organ combination
00H,00H,01H,01H:
Data length = 11H bytes
0nH:
n = Channel No.
[16']
[8']
[5+1/3']
[4']
[2+2/3']
[2']
[1+1/3']
[1']
[Response]
[Attack 4']
[Attack 2+2/3']
[Attack 2']
[Attack length]
[Attack mode] (00H=FIRST; 01H=EACH)
[Rotary-speaker speed]
[Rotary-speaker depth]
[Checksum (1 byte)] = 0 - sum(bulk data)
F7H:
End Of Exclusive
10. System Exclusive Message
(Special operators)
[F0H]
→
[43H]
→
[73H]
→
[xxH]
→
[
RR
RR
RR
RR
RR
H]
→
[0nH]
→
[ccH]
→
[vvH]
→
[F7H]
F0H:
Exclusive status
43H:
Yamaha
73H:
Clavinova
3BH:
Device ID (CLP’96n:3BH)
RR
RR
RR
RR
RRH:
SK special operator
0nH:
Control MIDI Change (n = Special Operator Channel No.)
cc:
Control No.
dd:
Value
F7H:
End Of Exclusive
Control
ON
ccH
ddH
SPLIT POINT
Always 00H
14H
Split key No.
METRONOME
Always 00H
1BH
00H:OFF
01H: –
02H:2/4
03H:3/4
04H:4/4
05H:5/4
06H:6/4
7FH:Normal
DAMPER LEVEL Ch:00~0FH
3DH
(Sets channel-
specific piano
damper level)
00H~7FH
CHANNEL DETUNING Ch:00~0FH
43H
(Sets channel-
specific
detuning)
00H~7FH
VOICE RESERVE Ch:00~0FH
45H
00H:RESERVE
OFF
7FH:ON *1
*1
When RESERVE=ON, received volume and
expression data becomes effective at next Key
ON. RESERVE=OFF is the normal setting.
11. Additional System Exclusive
Message
[F0H]
→
[43H]
→
[1nH]
→
[27H]
→
[30H]
→
[00H]
→
[00H]
→
[
RR
RR
RR
RR
RR
H]
→
[ccH]
→
[F7H]
* This message changes master tuning for all
channels. (If this and XG master-tuning message
are both received then last received becomes
effective.)
1) Master tuning
[00H]
→
[mmH]
→
[
RR
RR
RR
RR
RR
H]
→
[ccH]
F0H:
Exclusive status
43H:
Yamaha
1nH:
(If transmission, n=0. If reception, n=0~F.)
27H:
TG100 Device ID
30H:
Sub-ID
00H:
00H:
mmH: Master Tuning MSB
RR
RR
RR
RR
RRH:
Master Tuning LSB
ccH:
Any value up to 7FH.
F7H:
End Of Exclusive
CLP-811/611
MIDI Data Format/MIDI-Datenformat/Format de données MIDI/Formato de datos MIDI