ZyXEL Communications ZyXEL Dimension ES-3024 - Manual (Page 131)

Dimension ES-3024 Ethernet Switch
Commands Introduction 21-3
Table 21-1 command summary
COMMAND DESCRIPTION
switch [on|off] Enables/disables/ the system trace
log or shows whether it’s on or off.
online [on|off] Enables/disables the trace log
onscreen display (for example in
the telnet management window).
level [level] Sets the level (1-10) of trace logs
(1 shows the least) to display.
type <bitmap> Uses hexadecimal characters to
set the type of trace logs to record.
disp Shows the trace log.
clear Erases the trace log.
call Shows call events.
encapmask [mask] Shows which type of
encapsulation the trace log
records or sets it if you specify the
encapsulation’s hexadecimal
character.
trcpacket
create <entry> <size> Creates a packet trace buffer.
destroy Removes the packet trace buffer.
channel <name>
[none|incoming|outgoing|bothway
]
Sets the packet trace direction for
a given channel.
string [on|off] Enables/disables the sending of a
log to the trace packet buffer when
configuration changes are made or
displays the current setting.
switch [on|off] Enables/disables packet trace or
displays the current setting.
disp Displays the trace packets.
udp Sends the trace packets to
another system using UDP.
udp switch [on|off] Enables/disables the sending of
the trace packets to another
system using UDP or displays the
current setting.
udp addr <addr> Sets the target IP address for
sending trace packets using UDP.
udp port <port> Sets the UDP port (should match
that of the target IP address) for
sending trace packets using UDP.
parse [[start_idx], end_idx] Displays detailed packet details of
the packet range specified.