ZyXEL Communications ZyXEL Dimension ES-3024 - Manual (Page 139)

Dimension ES-3024 Ethernet Switch
Commands Introduction 21-11
COMMAND DESCRIPTION
enable Enables 802.1X security on the
switch.
disable Disables 802.1X security on the
switch.
status Shows switch 802.1X security
status.
port
enable <port_no> Enables 802.1X security on the
specified port.
disable <port_no> Disables 802.1X security on the
specified port.
reauth <port_no> <on|off> Turns re-authentication on or off
on the specified port.
reauthperiod <port_no><value> Configures how often the
specified port should be re-
authenticated.
status <port_no> Displays 802.1X security status
on the specified port.
set
auth <profile | radius> Sets whether an external
RADIUS server or the internal
switch user database performs
authentication.
portcontrol<port-no><auto |auth |
unauth>
Sets how the specified port
should be authenticated.
radius
server <ip> Sets the external RADIUS server
IP address.
secret <secret> Sets the external RADIUS server
password.
port <port> Sets the external RADIUS server
port number.
show Displays the external RADIUS
server settings.
profile Internal switch user database.
Information in this database is
flushed on restarting the switch.
add <username> <passwd> Creates a username and
password profile in the internal
switch user database.
delete <idx> Deletes a username and
password profile in the internal
switch user database.