ZyXEL Communications ZyXEL Dimension ES-3024 User Manual
Page 81
Dimension ES-3024 Ethernet Switch
Filter Setup
10-3
Figure 10-2 Configuring or Editing a Filter Rule
Table 10-2 Configuring or Editing a Filter Rule
LABEL DESCRIPTION
Active
Make sure to select this check box to activate your rule. You may temporarily
deactivate a rule without deleting it by deselecting this check box.
Name
Type a descriptive name for this filter rule. This is for identification purpose only.
Source
The next three fields pertain to the source MAC address and source port.
Source MAC
Address
Type a MAC address in valid MAC address format, that is, six hexadecimal character
pairs or click All Entries to apply the filter rule to all MAC addresses.
VID Type the VLAN group identification number.
Port Select the port to which the filter rule should be applied. You may choose one port only
or all ports (All Ports).
Destination
The next three fields pertain to the destination MAC address and destination port.