ZyXEL Communications ZyXEL Dimension ES-3024 User Manual
Page 92
Dimension ES-3024 Ethernet Switch
13-2
Trunk Setup
Figure 13-1 Trunk Setup
Table 13-2 Trunk Setup
LABEL DESCRIPTION
Trunk ID
The trunk ID identifies the trunk group, that is, one logical link containing multiple ports
– see Table 13-1 Trunk Groups.
Starting Port
This is the beginning port in the trunk group’s port range and is not configurable - see
Table 13-1 Trunk Groups.
Ending Port
Select the end port in the port range from the drop-down list box - see Table 13-1 Trunk
Groups.
Active
Make sure to select this check box to activate the trunk group. You may temporarily
deactivate a trunk group without deleting it by clearing this check box.
Click Apply to save your changes back to the switch or click Cancel to begin configuring this screen afresh.