ZyXEL Communications ZyXEL Dimension ES-3024 - Manual (Page 89)

Dimension ES-3024 Ethernet Switch
Bandwidth Control Setup 12-3
Figure 12-2 Bandwidth Control Setup Edit
Table 12-2 Bandwidth Control Setup Edit
LABEL DESCRIPTION
Active Make sure to select this check box to activate your rule. You may temporarily
deactivate a rule without deleting it by clearing this check box.
Name Type a descriptive name for this bandwidth control rule. This is for identification
purpose only.
Maximum Bandwidth Type the maximum bandwidth allowed in kilobits per second for this traffic flow.
Source The next three fields pertain to the source MAC address and source port.
MAC Address Type a MAC address in valid MAC address format, that is, six hexadecimal character
pairs or click All Entries to apply the filter rule to all MAC addresses.
VID Type the VLAN group identification number.
Port Select the port to which the bandwidth control rule should apply. You may choose one
port only or all ports (All Ports).