Configuring or editing a filter rule, 2 configuring or editing a filter rule – ZyXEL Communications ZyXEL Dimension ES-3024 User Manual
Page 80
Dimension ES-3024 Ethernet Switch
10-2
Filter Setup
Table 10-1 Filter Setup
LABEL DESCRIPTION
Active
This field displays Yes when the filter rule is activated and No when is it deactivated.
Source MAC
Address
This field displays the source MAC address in hexadecimal format. All Entries means
all MAC addresses.
Source Port
This field displays the Ethernet port number from which packets are transmitted. You
may choose one port only or all ports.
Destination MAC
Address
This field displays the destination MAC address in hexadecimal format. All Entries
means all MAC addresses.
Destination Port
This field displays the Ethernet port number to which packets are sent. You may
choose one port only or all ports.
Delete
To delete a rule, select its checkbox in this column and then click the Delete button.
Add
To add a filter rule, click this button.
Delete
To delete a rule, select its checkbox in the Delete column and then click this Delete
button.
Cancel Click
Cancel to begin configuring this screen afresh.
10.2 Configuring or Editing a Filter Rule
Click Add to configure a new filter rule or click an index number to edit an existing filter rule. Either way, a
screen as shown next is displayed.