ZyXEL Communications ZyXEL Dimension ES-3024 - Manual (Page 78)

Dimension ES-3024 Ethernet Switch
9-2 Static MAC Forward Edit Setup
Table 9-1 Static MAC Forward Setup
FIELD DESCRIPTION
Port This field displays the port where the MAC address shown in the next field will be forwarded.
MAC Address This field displays the MAC address that will be forwarded.
Active This field displays whether this static MAC address forwarding rule is active or not. You may
temporarily deactivate a rule without deleting it.
Add To add a new static MAC address-forwarding rule, click this button.
Delete To delete a rule, select its checkbox in the Delete column and then click this Delete button.
Cancel Click Cancel to begin configuring this screen afresh.
9.2 Configuring or Editing a Static MAC Forward Rule
Click Add to configure a new rule or click an index number to edit an existing static MAC address rule. Either
way, a screen as shown next is displayed.
Figure 9-2 Configuring or Editing a Static MAC Forward Rule
Table 9-2 Configuring or Editing a Static MAC Forward Rule
FIELD DESCRIPTION
Active Make sure to select this check box to activate your rule. You may temporarily deactivate a rule
without deleting it by deselecting this check box.
Name Type descriptive name for identification purposes for this static MAC address forwarding rule.
MAC Address Type the MAC address in valid MAC address format, that is, six hexadecimal character pairs.
Static MAC addresses do not age out.
VID Type the VLAN identification number.
Port Select a port where the MAC address entered in the previous field will be automatically forwarded.
Click Apply to save your changes back to the switch or click Cancel to begin configuring this screen afresh.