ZyXEL Communications ZyXEL Dimension ES-3024 - Manual (Page 159)

Dimension ES-3024 Ethernet Switch
Product Specifications 1
Appendix A
Product Specifications
These are the ES-3024 product specifications.
Chart 1 General Product Specifications
Standards
IEEE802.3 10BASE-T Ethernet (twisted-pair copper)
IEEE802.3u 100BASE-TX Fast Ethernet (twisted-pair copper)
ANSI/IEEE802.3 Auto-negotiation
IEEE802.3x Flow Control
IEEE802.1p Priority Queues
IEEE802.1q VLAN
IEEE802.1d Spanning Tree
IEEE 802.1x Authentication
IEEE 802.3 ad Trunking
IEEE 802.1w Rapid reconfiguration
Protocol CSMA/CD
Interface
24 10/100BASE-T Ethernet ports
Two expansion slots for uplink modules
One expansion slot for stacking module.
One console port
Data Transfer Rate
Ethernet: 10Mbps (half duplex), 20Mbps (full duplex)
Fast Ethernet: 100Mbps (half duplex), 200Mbps(full duplex)
Uplink rates depend on the uplink module used (see your module manual)
Network Cables
10BASE-T: 2-pair Unshielded Twisted Pair (UTP) Cat.3, 4, 5 (100 meters)
EIA/TIA-586 100-ohm Shielded Twisted Pair (STP) (100 meters)
100BASE-TX, 1000BASE-T: UTP Cat.5 (100 m max.) EIA/TIA-568 100-ohm STP
(100 m max.)
Uplink cables depend on the uplink module used (see your module manual)
Full/Half Duplex
Full/half duplex for 10/100Mbps speeds
Full duplex only for Gigabit speeds (see your module manual)
Media Interface Exchange All ports are auto-crossover (auto-MDI-X) and auto-negotiating.