ZyXEL Communications ZyXEL Dimension ES-3024 - Manual (Page 35)

Dimension ES-3024 Ethernet Switch
Hardware Connections 3-3
Figure 3-2 Loosening the Screws and Removing the Cover Plate
Step 3. You should wear an anti-static wrist strap or touch any grounded or metal objects to discharge any bodily
static electricity before you continue.
Step 4. Remove the optional module from its protective anti-static packaging. Avoid touching the onboard
circuit components by holding it by the edge.
Step 5. Insert the optional module into an available expansion slot on the switch. Press it firmly until the
optional module snaps into place.
Step 6. Secure it to the switch with the retaining screws.
Figure 3-3 Inserting An Example Module 1
Never force, bend or twist the optional modules into the expansion slots.
Step 7. See section 3.3.1 for instructions on connecting the power. The switch automatically detects the installed
optional module. Connect any necessary network cables to the optional module and check the LEDs to
verify that it is functioning properly.
1 This is an example module only!
Slide the optional module
into the expansion slot until
it snaps into place.