ZyXEL Communications ZyXEL Dimension ES-3024 - Manual (Page 140)

Dimension ES-3024 Ethernet Switch
21-12 Commands Introduction
COMMAND DESCRIPTION
list Lists all profiles in the internal
switch user database.
class A class is the basic rule
parameters for a bandwidth
control, port mirror or port filter
rule.
display Displays run-time bandwidth
control, port mirror and port filter
rule status.
l2set <src port> <src mac> <src
vid><dest port><dest mac> <dest
vid>
Sets source/destination port,
MAC address and VLAN group
information.
del <class id> A class is automatically created
when you create a bandwidth
control, port mirror or port filter
rule. This command deletes the
specified class.
bmstorm These commands relate to
broadcast storm control.
disable Clears current run-time settings
type <type> Specifies the type of frames to
limit in the switch; broadcast,
multicast or both.
basis <type> Specifies whether frames are
limited in the switch on a per-
packet or per-Byte basis.
display [index] Displays broadcast storm control
ports’ settings
interval [value] Sets/displays the monitor
interval.
set <port><threshold><direction> Specifies the packet threshold
and direction (ingress/egress) on
the specified port.
del <index> Disables broadcast storm control
on this port.
mac static Displays static MAC addresses.
disable Clears current run-time static
MAC address settings
display [port] Displays current run-time static
MAC addresses on the specified
port.
set<port><mac addr.><vid> Configures a static MAC address
on the specified port.