Temperature and flows, Technical data – York YCAS0130 User Manual
Page 50
50
YORK INTERNATIONAL
FORM 201.19-NM1 (204)
TEMPERATURE AND FLOWS
(SI UNITS)
Technical Data
MODEL
NUMBER
YCAS
LEAVING WATER
TEMPERATURE (°C)
Evaporator FLOW
(l/s
3
)
AIR ON CONDENSER (°C)
MIN.
1
MAX.
2
MIN.
MAX.
MIN.
MAX
0130EC
4.4
12.8
8.7
33.1
-17.7
51.7
0140EC
4.4
12.8
8.7
33.1
-17.7
51.7
0150EC
4.4
12.8
12.6
37.9
-17.7
51.7
0160EC
4.4
12.8
12.6
37.9
-17.7
51.7
0170EC
4.4
12.8
12.6
37.9
-17.7
51.7
0180EC
4.4
12.8
12.6
37.9
-17.7
51.7
0200EC
4.4
12.8
15.8
47.3
-17.7
51.7
0210EC
4.4
12.8
15.8
47.3
-17.7
51.7
0230EC
4.4
12.8
15.8
47.3
-17.7
51.7
Excessive fl ow, above the max GPM,
will damage the evaporator.
NOTES:
1. For leaving brine temperature below 40°F (4.4°C), contact your nearest YORK offi ce for application requirements.
2. For leaving water temperature higher than 55°F (12.8°C), contact the nearest YORK offi ce for application guidelines.
3. The evaporator is protected against freezing to -20°F (-28.8°C) with an electric heater as standard.