ACU-RITE MILLPWR Auxiliary - Manual (Page 11)

AMI Reference Manual 8
Output Devices (J18)
The J18 output connector is commonly used to:
• Control up to five devices (i.e., coolant pumps and rotary indexers)
from within a
MILLPWR program.
• Activate external devices during hole patterns and position/drill
steps.
Common relay contact
Normally Open relay contact
Normally Closed relay contact
Common relay contact
Normally Open relay contact
Normally Closed relay contact
Common relay contact
Normally Open relay contact
Normally Closed relay contact
Common relay contact
Normally Open relay contact
Normally Closed relay contact
Common relay contact
Normally Open relay contact
Normally Closed relay contact
Common relay contact
Normally Open relay contact
Normally Closed relay contact
Common relay contact
Normally Open relay contact
Normally Closed relay contact
Common relay contact
Normally Open relay contact
Normally Closed relay contact
Table 2 (J18)
Pin # Description Output Function (Default State)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24 AMI output #1
AMI output #1
AMI output #1
AMI output #2
AMI output #2
AMI output #2
AMI output #3
AMI output #3
AMI output #3
AMI output #4
AMI output #4
AMI output #4
AMI output #5
AMI output #5
AMI output #5
AMI output #6
AMI output #6
AMI output #6
AMI output #7
AMI output #7
AMI output #7
AMI output #8
AMI output #8
AMI output #8
Normally = Relay de-energized