ACU-RITE MILLPWR Auxiliary - Manual (Page 34)

AMI Reference Manual 31
Symptom Probable Cause
Recommended
Corrective Action
Improper wiring Ensure stripped end of the
wire is adequately crimped
by the terminal on the
board (vs. insulation being
crimped).
F3 fuse is loose Check that the F3 fuse is
securely in place.
F3 fuse is blown Replace the F3 fuse with
one that’s appropriate for
the AMI operation (refer to
Electrical Specifications).
External
emergency stop
button does not
work Improper voltage If circuit is wired using
external power, ensure
120VAC (+/- 10%) is being
used.
F1 fuse is blown Contact ACU-RITE for
repair procedure.
No operation or
improper operation
(cont’d)