ACU-RITE MILLPWR Auxiliary - Manual (Page 8)

AMI Reference Manual 5
Input Devices (J2)
The J2 input connector is commonly used to:
• Monitor the position of machine guards
• Monitor the oil level of an automatic lubrication system
• Remote Go Input
Do not apply power directly to the AMI
input pins.
Connector Definitions
Machine Guards are safety features that will alter the
activity of certain program functions when they are open.
When guard switches are open:
1) Find Home feature cannot be initiated.
2) Single Cycle cannot be run.
3) A program cannot be run.
4) The table is still able to be moved.
If the guard switches are opened during these operations:
1) Find Home feature will be aborted.
2) The program currently operating will pause and the table will stop
moving, but the program will not be aborted.
3) Single Cycle will pause.
Table 1 (J2)
Pin # Description
9
10
11
12
13
14
15
16 Not active
Not active
Not active
Not active
Not active
Not active
Not active
Not active
Pin # Description
1
2
3
4
5
6
7
8 Machine Guard input
Machine Guard input
Low Oil input
Low Oil input
Remote Go input
Remote Go input
Not active
Not active