VEGA VEGAPULS 56 Profibus PA - Manual (Page 52)

52 VEGAPULS 56 Profibus PA
Setup
• Click to " Profibus output Profibus output Profibus output Profibus output Profibus output“.
In the window " Profibus output“ you can
determine the options for the Profibus output
(acc. to the Profibus PA instrument profile).
VEGA Profibus sensors operate in the so-
called profile 3, in which the structure of
measured value processing is determined
(see also chapter "6 PA Function diagram“).
In this software diagram you can see the
structure of the measured value processing
acc. to profile 3 (schematic presentation).
The numberings A1, A2 … E are also stated
in the PA function diagram.
You can choose as a physical quantity
"dimensionless (plain numbers), volume,
mass, height and distance“ and assign an
appropriate unit of measurement (e.g. l, hl).
The sensor display then shows the meas-
ured value in the selected physical quantity
and unit.
• Save the adjustments in the menu " Profibus
output“ with "OK OK OK OK OK“.
The adjustments are now transferred to the
sensor and you are again in the menu win-
dow "
Outputs“.
• Click in the menu window " Outputs“ to
" Quit Quit Quit Quit Quit“.
• Click in the menu window " Instrument data
parameter adjustment“ to "Quit Quit Quit Quit Quit“.
E
D
B
C
A1
A2
A3
PV-Scale
Out-Scale