VEGA VEGASON 51P…53P Profibus PA - Manual (Page 3)

VEGASON 51P … 53P 3
Safety information
Please read this manual carefully, and also take
note of country-specific installation standards
(e.g. the VDE regulations in Germany) as well
as all prevailing safety regulations and acci-
dent prevention rules.
For safety and warranty reasons, any internal
work on the instruments, apart from that in-
volved in normal installation and electrical con-
nection, must be carried out only by qualified
VEGA personnel.
Note Ex area
Please note the approval documents (yellow
binder), and especially the included safety
data sheet.
Contents
5 Electrical connection
5.1 Connection – Connection cable – Screening ................... 35
5.2 Sensor address ................................................................. 38
5.3 Connection of the sensor .................................................. 40
5.4 Connection of the external indicating instrument ............ 41
6 Setup
6.1 Adjustment media .............................................................. 42
6.2 Adjustment with VVO ......................................................... 43
6.3 Sensor adjustment with the adjustment module
MINICOM ............................................................................ 65
7 Diagnostics
7.1 Simulation ............................................................................ 72
7.2 Error codes ........................................................................ 72
8 Function diagram and PA parameters
8.1 Parameter listing ................................................................ 73
8.2 Function diagram ............................................................... 78